Half Rounds
Half Rounds
![]() |
![]() |
Mercer Abrasives BHRB10 Half Round Files, Bastard, 10-Inch List Price: $11.53 Sale Price: $10.16 |
![]() |
Mercer Abrasives BHRS08 Half Round Files, Smooth, 8-Inch List Price: $11.53 Sale Price: $10.15 |
![]() |
Nicholson Hand File (Boxed), American Pattern, Double Cut, Half-Round, Coarse, 16" Length List Price: $42.42 Sale Price: $22.31 |
|
First set of teeth is known as the overcut, second is known as upcut. Upcut is finer than overcut. Double-cut file is used with heavier pressure than the single-cut and removes material faster from the workpiece. |
![]() |
Nicholson Hand File (Boxed), American Pattern, Double Cut (Single Cut on Back/Flat Sides), Half-Round, Coarse, 14" Length List Price: $22.44 Sale Price: $11.74 |
|
Single-cut files are often used with light pressure to produce a smooth surface finish or to put a keen edge on knives, shears or saws. All sizes taper slightly in width |
![]() |
Freud 82-114 1/4-Inch Radius Half Round Router Bit with 1/2-Inch Shank List Price: $50.50 Sale Price: Too low to display |
|
Produces a fully rounded edge on dimensional lumbar. Creates an attractive half-round profile on furniture and mouldings. Guiding device must be used. Application: Cuts all composition materials, plywood, hardwood, and soft wood... |
![]() |
Nicholson Hand File (Boxed), American Pattern, Double Cut, Half-Round, Coarse, 8" Length List Price: $15.56 Sale Price: $11.22 |
|
Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell (R) chain, Crescent (R) brand wrenches and pliers, Lufkin (R) measuring tools, Nicholson (R) files and saws, Plumb (R) hammers, H... |
![]() |
PFERD 15013 10" Smooth Cut Half Round Wood Rasp Sale Price: $7.82 |
|
PFERD Rasps offer extremely long service life and optimal tooth geometry for high removal rates with less operator force required. |
![]() |
Freud 82-515 5/8-Inch Radius Half Round Router Bit with Bearing with 1/2-Inch Shank List Price: $93.20 Sale Price: Too low to display |
|
Adds an attractive half-round profile on furniture and mouldings. Enhances dimensional lumber with a fully rounded edge. Comes with bearings. Application: Cuts all composition materials, plywood, hardwood, and soft wood... |
![]() |
PFERD Hand File, American Pattern, Double Cut, Half-Round, Coarse, 12" Length, 1-1/8" Width, 11/32" Thickness List Price: $27.60 Sale Price: $21.34 |
|
American Pattern Machinist Files are the most widely used files. These files are used for filing out concave surfaces and crevices, and for rounding out holes. The spiral cut enables them to remove metal rapidly and leaves a smooth finish. |
![]() |
Round One to the Hot Crazy Chick Sale Price: $1.99 |


US $330.00
















